Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 52
Manual Installation Using the Add Printer Wizard Windows 8/8.1/Server 2012/Server 2012, Click [OK].
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5 Manual Installation Using the Add Printer Wizard (Windows 8/8.1/Server 2012/Server 2012 5.2 3 On the toolbar, select [Add a printer]. 4 Select this machine from the list, and then click [Next]. % To use the LPR/Port9100 protocol, select the printer with its IP address (e.g. 10.10.10.10). % To use the SMB connection, select the printer with its "\\NetBIOS name\print service name". You can check the NetBIOS name and print service name by selecting [Administrator Setting] - [Network Setting] - [Controller NIC Setting] - [SMB Setting] - [Print Setting]. In the default setting, the last six characters of the NetBIOS name correspond to the low-order three bytes of the MAC address. To check the MAC address, select [Configuration Page]. % For the SMB connection, click [Next], and then click [OK] in the [Connect to Printer] page that is displayed. % It may take some time to finish searching the entire list of printers. 5 Click [Have Disk...]. 6 Click [Browse...]. 7 Select a desired printer driver in the CD-ROM, and then click [Open]. % Available printer drivers: PS Plug-in driver, PPD driver, PCL driver 8 Click [OK]. The [Printers] list is displayed. 5-4 bizhub PRESS 1250/1250P/1052, bizhub PRO 951