Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 82
Additional Information for Controller Setting - pdf
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
7 7.1.2 Other Additional Information and Corrections 7.1 Additional Information for Controller Setting The following contents have been added to [08 Administrator Setting] - [01 Software Switch Setting]. Refer also to "6.2.2 [08 Administrator Setting] - [01 Software Switch Setting]" in [User's Guide - POD Administrator's Reference] of this machine (or "11.2.2 [08 Administrator Setting] - [01 Software Switch Setting]" in [User's Guide - Main Body] for bizhub PRESS 1250P (Inch area)). Specify settings by selecting OFF(0)/ON(1) for each switch. See the following table for selecting OFF(0)/ON(1) for a desired switch. All the default settings are OFF(0). Switch No. 46 48 49 53 54 55 Description Setting Since printing misalignment occurs when the minimum value of the PDF trimmed size (CropBox) is not 0, set the trimmed size area to be located in the center of the page. When using PageScope Direct Print, a PDF job of a paper size larger than the maximum size specified for this machine should be output without causing a PS error. When standard and custom sizes are mixed in originals and left binding is selected in duplex printing, the top binding layout is inevitably selected for custom size originals to meet specifications; therefore, use this setting to apply the left binding layout also to the custom size originals. Although the machine performs transmission processing for each status (more than once) when "@PJL INFO STATUS" command is received and transmitted, statuses should be merged to perform a single transmission processing. Change the order of notice JobStart/End by "@PJL USTATUS JOB=ON" command from JobStart1 -> JobStart2 -> ... JobEnd1 -> JobEnd2... to JobStart1 -> JobEnd1 -> JobStart2 -> JobEnd2..., so that the timing of notice JobStart should be after the first sheet is output. If "@PJL EOJ NAME" is included in a file, job separation occurs to possibly result in returning unexpected number of pages. To solve this problem, add a process to distinguish the job names of "@PJL JOB NAME" and "@PJL EOJ NAME" so that it should be treated as a single job only when the job names are identical. Setting value: 0: Do not locate in the center of the page 1: Locate in the center of the page Setting value: 0: Cannot be output due to a PS error 1: Can be output without causing a PS error To output with this setting, the following conditions should be satisfied: • Set Switches No. 32 and No. 42 to "1." • Available paper size is 62.99" e 82.68" (1600 e 2100 mm) at maximum. • Only the maximum printing area is printable. Important: When a change is made for the software switch settings, turn the sub power off and back on again for the change to take effect. Setting value: 0: Top binding layout 1: Left binding layout [Restrictions] Available only for PostScript files. Setting value: 0: Perform transmission processing for each status 1: Merge statuses to perform a single transmission processing Setting value: 0: The JobStart notice is given after all jobs are received 1: The JobStart notice is given after the first sheet is output Setting value: 0: Do not distinguish the job names of "@PJL JOB NAME" and "@PJL EOJ NAME" 1: Distinguish the job names of "@PJL JOB NAME" and "@PJL EOJ NAME" Important: The Software Switch No. 7 should be "0" to distinguish the job names. 7-4 bizhub PRESS 1250/1250P/1052, bizhub PRO 951