Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 83
PDF, TIFF, PS, PCL, ASCII Text, Other Additional Information and Corrections, Important, Switch
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
7.1 Other Additional Information and Corrections 7 Switch No. 56 57 58 74 76 77 78 79 81 Description Setting Since PS and PCL are the only PDLs that can output banner pages, all PDLs supported by the controller should be available for this function. When outputting banner pages, the set count should be printed. When outputting banner pages with "Face Up (N to 1)" specified, the banner page should be output as the top page (on top of page 1). The machine should support the [LPQ-P] command used on Linux. Set the machine to support MIB for the number of printed set count (kmJmJobOutputDocCopyNumbers). When outputting data larger than the paper size in PageScope Direct Print, no magnification and the centering layout should be applied. When outputting a PCL job, "Auto" should be set for the tray even though the machine, according to specifications, selects the one used in the previous job unless otherwise specified. The following two conflicting functions can be set simultaneously for a PCL job. • Specify Text Margin • Horizontal Motion Index By default, "Specify Text Margin" has priority in the PCL-compliant specifications, but "Horizontal Motion Index," the HP-compatible specification, should be set to be given priority. You can specify the compression format for scanning a PDF file. Setting value: 0: PS and PCL only 1: All PDLs supported by the controller (PDF, TIFF, PS, PCL, ASCII (Text), PPML) [Restrictions] • A specific condition is required to output banner pages in PageScope Direct Print. For details, contact your service representative. Setting value: 0: Not print the set count 1: Print the set count [Restrictions] • A specific condition is required to output banner pages in PageScope Direct Print. For details, contact your service representative. Setting value: 0: Output the banner page before a job 1: Output the banner page after a job [Restrictions] • A specific condition is required to output banner pages in PageScope Direct Print. For details, contact your service representative. Setting value: 0: The machine does not reply anything even if you enter the [LPQ-P] command. 1: If you enter the [LPQ-P] command, the machine replies [Ready] or [Not Ready] depending on the machine status. Important: • [Ready]: Can execute jobs • [Not Ready]: Cannot be recovered automatically (in the case of errors) Setting value: 0: Not support MIB 1: Support MIB Setting value: 0: Setting disabled 1: Setting enabled [Restrictions] • Set the switch number 32 to "1." • Available only for TIFF and PDF. • The switch number 77 has priority even with the switch number 29 set to "1." Setting value: 0: Setting disabled 1: Setting enabled Setting value: Set this switch to "1" to change to the HP-compatible specifications. 0: Prioritizes "Specify Text Margin". (PCL-compliant specifications) 1: Prioritizes "Horizontal Motion Index". (HP-compatible specifications) Setting value: 0: MMR 1: ZIP bizhub PRESS 1250/1250P/1052, bizhub PRO 951 7-5