Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 39
Zoom/Image Shift Adjustment, If you perform the Scan Measurement Adjustment, Gap Adjustment
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2.2 The Workflow of Both Sides Adjust 2 16 Press [Adjustment Start]. 17 Press [OK]. Now the Chart Adjustment is completed. % If fine tuning is needed, perform the Zoom/Image Shift Adjustment. See page 2-21 for details. 2.2.4 Zoom/Image Shift Adjustment The magnification ratios and printing positions (up/down or right/left) on the front and back sides can be finely tuned. This is a practical method when fine-tuning after the Scan Measurement Adjustment, Gap Adjustment, or Chart Adjustment or when using the known results of duplex printing since you can directly enter adjustment values in percentage or a specific numerical number. NOTICE If you perform the Scan Measurement Adjustment, Gap Adjustment, or Chart Adjustment after the Zoom/Image Shift Adjustment, the Zoom/Image Shift Adjustment may be required again. NOTICE The Zoom/Image Shift Adjustment can be registered in the paper setting to be recalled later. To register the paper setting, make adjustments on the Tray Setting Screen and press [Register]. bizhub PRESS 1250/1250P/1052, bizhub PRO 951 2-21