Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 31
The Workflow of Both Sides Adjust, Start, control panel, Press [Close].
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.2 The Workflow of Both Sides Adjust 2 5 Press Start on the control panel. A test chart will be output. % The chart has one or more of the marks on the [front] side to indicate which paper tray was used to print it. See page 2-25 for details. 6 Press [Close]. 7 Measure the misalignment between front and back sides using the points ([a] to [d]) on the [back] side of the chart to determine the adjustment value. % The figure below shows an example of measuring [a]. The scale interval is 0.5 mm. % The black line in the figure represents the front side, and the gray line represents the back side. % You can enter the value in 0.1 mm increments. % Be sure to make note of the measured values. % For example, when the scale of [a] shows the misalignment of 1.5 mm in positive direction between the front and back sides as shown in the figure below, press [1], [5], and then [+ -] to enter the value "-1.5" in order to shift the gray line on the back side 1.5 mm in negative direction. >D@ EDFN \ [ bizhub PRESS 1250/1250P/1052, bizhub PRO 951 2-13