Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 41
For the Zoom/Image Shift Adjustment, check paper at the center of
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2.2 The Workflow of Both Sides Adjust 2 4 Enter numeric values for Zoom and Image Shift using the touch panel keypad. % To adjust the Zoom, press [Vertical] or [Horizontal] and then enter a desired value. [Vertical] adjusts the magnification in crosswise direction. [Horizontal] adjusts the magnification in paper feed direction Enter a positive value to enlarge the print area, or a negative value to reduce it. The adjustment value changes in 0.05% increments. Adjustable range: -10 to +10 for [Horizontal] on both [Front] and [Back], and for [Vertical] on [Front] -5 to +5 for [Vertical] on [Back] % To adjust the Image Shift, press [Up/Down] or [Right/Left] and then enter a desired value. Enter a positive value to move the print area upward or rightward, or a negative value to move it downward or leftward. The adjustment value changes in 0.1 mm increments. Adjustable range: - 100 to + 100 % You can change the value by pressing [,] and [+]. % Press [+-] to specify the value to be positive or negative. % Press [Clear] key to reset the entered numeric value to [0]. % For the Zoom/Image Shift Adjustment, check paper at the center of the page. The black mark in the figure below represents an image on the front side, and the gray mark represents the one on the back side. Adjustment example of Zoom: When the image on the back side is vertically enlarged to 10.025 mm against that of 10 mm on the front side, press [Vertical] on [Back], and then press [5]. Press [+ -] to display [- 5]. The back side images will be reduced by 0.25%. bizhub PRESS 1250/1250P/1052, bizhub PRO 951 2-23