Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 19
Drawer loading, 120 mm
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5.4 Drawer loading (2) (1) (1) 1) Open the Drawer. Note: To open the Drawer, it must be in down position. 2) Move the stops (1). 3) Place paper properly in the Drawer. 4) Adjust the paper guides. Pay attention not to damage the paper edges. 5) Adjust the magnetic guide (2) position 5 mm (0.20") above the pile of paper when the tray is up. 6) Close the Drawer. Note: Install the Magnetic Stops (1) on the paper guides when using paper format from 4.73" (120 mm) to 7" (177,8 mm) in the crosstrack direction. Feeding accuracy is also improved in the Drawer when using the paper stops (1) for small paper format in the intrack direction (paper format less than 260 mm). Operator Manual Initial issue: 05/11 Page 9 - 19 Latest revision: 03/13 Crosstrack Intrack Paper Path