Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 72
The content of the booklet MUST BE PRINTED N, and placed in the High Pile station.
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
8.1.5.6 Feeding "X" sheets from the Drawer station + "X" sheets from the High Pile with integrity checked only in the High Pile station (not in the Drawer station). This application is specific for Watkiss PSQ200 bookletmaker. The stitching head are from the bottom, so the cover is fed first, and afterward the content of the booklet. The barcode sheet counter is 1N. X can be 1, 2,... or N sheets,.... Barcode is checked ONLY in the High Pile (NOT in the drawer station). The cover must be printed separately (without barcode) and placed in the drawer station. The content of the booklet MUST BE PRINTED N1 and placed in the High Pile station. "1" represents the 1st sheet fed from the High Pile station and must be on the top of the High Pile. For the example below, the first sheet fed will be the cover (without barcode) from the drawer station. The second sheet fed will be the sheet on the top of the High Pile (sheet N°1 - 00000105). The last sheet fed into the finisher will be the last page of the booklet (sheet N°5 - Barcode 00000505). First subset :1 cover from the drawer station (NO Barcode). Second subset : 5 sheets from the High Pile (with BCR integrity checked). Barcode sheet counter : 1N. Sheet in the Drawer station: Sheets in the High Pile Station: Operator Manual Initial issue: 05/11 Page 9 - 72 Latest revision: 03/13