Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 52
Colorpress cart pre-lift, lift procedure.
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
When using the Colorpress cart, press on the button "Colorpress cart pre-lift" on the GUI (in the preference menu). Once this button is activated, the pre-lift will be 35mm higher. So, the Colorpress cart tray is correctly lifted ±5mm under the moving registration wall during the pre- lift procedure. Note: Once activated (button in green color), the "Colorpress cart pre-lift" is enable only for 1 pre-lift setup ! For a second pre-lift setup, the button must be re-activated again Button is green to show that the Colorpress cart prelift is actived PSF Preferences menu Operator Manual Initial issue: 05/11 Page 9 - 52 Latest revision: 03/13
Operator Manual
Page 9 - 52
Initial issue: 05/11
Latest revision: 03/13
When using the Colorpress cart, press on the button
“Colorpress cart pre-lift”
on the GUI (in
the
preference menu). Once this button is activated, the pre-lift will be
35
mm higher. So, the
Colorpress cart tray is correctly lifted ±
5
mm under the moving registration wall during the pre-
lift procedure.
Note: Once activated (button in green color), the
“Colorpress cart pre-lift”
is enable only
for
1
pre-lift setup !
For a second pre-lift setup, the button must be re-activated again
PSF
Preferences
menu
Button is green
to show that the
Colorpress cart
prelift is actived