Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 55
Adjustment of the High Pile paper stops :, LATERAL
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7.7.2 Adjustment of the High Pile paper stops : According to the paper format, the High Pile paper stops are setup automatically against the paper pile. However, corrections can be applied in case of special paper. For example: - In case of paper with curl: Tighten the paper stops. - If the barcode reader does not scan on the barcode printed on the paper. Adjust the position of the rear stop (and so the position of the barcode reader) to have a good barcode reading. 3° -> 5° Note: Check that the angle between paper stop and the paper is close to 3° - 5°. Press the button (1) to modify the High Pile paper stops position: - REAR Stop position adjustment (2). - LATERAL Stops position adjustment (3). 2 1 3 Operator Manual Initial issue: 05/11 Page 9 - 55 Latest revision: 03/13