Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 62
Number of sheets per set, Note: Job ID and Sheet Number are required fields
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
The following screen explains the way to program the barcode definition: PSF Preferences menu • if length = 0 then the field is not used. • if length ≠ 0 then field is activated. The barcode definition has 5 fields and is like aaaabbccde. • aaaa = Job ID (reference number of the job). • bb = N° of the sheet of the booklet. • cc = Number of sheets in the booklet. • d = Check code: if length = 0 then Check code is not used. if length = 1 then Check code is activated to identify the sheet N used for N1 or 1N. The "Number of sheets per set" field can be desactivated. • e = Switch (end of subset): if length = 0 then Switch is not used. if length = 1 then Switch is activated to identify the end of the subset. This function can be used if the barcode is printed on the lower face of the sheet and so read into the conveyor. The barcode sheet counter can also be selected as N1 and 1N. • N1 : The cover is the LAST sheet fed and has the sheet number 1. This mode is the default mode for CP Bourg finishers (BDFE, BME,....). • 1N : The cover is FIRST sheet fed and has the sheet number 1. This mode is specific for Watkiss PSQ200 bookletmaker. The stitching head are from the bottom, so the cover is fed first, and afterward the content of the booklet. Note: Job ID and Sheet Number are required fields Operator Manual Initial issue: 05/11 Page 9 - 62 Latest revision: 03/13