Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 86

10.1 Handheld scanner operation If the Handheld scanner beeps 3 times when scanning a barcode, the link has not been established. If the Handheld scanner beeps once, the link has been established. The green LED on the base flashes to indicate the Handheld scanner's battery is charging. 10.1.1 Beeper and LED sequences and meaning The Handheld scanner contains LEDs on the top of the Base to indicate its power up, communication, and battery status. Simply stated, red LED=error and green LED=success of any type. The audible indicators of the unit have meaning as well: 3 beeps=error, 2 beeps=menu change, 1 beep=all other successes. The table below lists the indication and cause of the LED illumination and beeps for the Handheld scanner. LED Indication Normal Operation Red Flash Green Flash Red, blinking Menu Operation Green Flash Red, blinking Beeper Indication None 1 beep 3 beeps 2 beeps 3 beeps Cause Battery low Successful communication or linking Failed communication Successful menu change Unsuccessful menu change Handheld Scanner LED Sequences and Meaning 10.1.2 Override Locked Handheld scanner If you need to replace a broken or lost Handheld scanner that is linked to a base, scan the Override Locked Handheld scanner barcode with a new Handheld scanner, and place that Handheld scanner in the base. The locked link will be overridden; the broken or lost Handheld scanner's link with the base will be removed, and the new Handheld scanner will be linked. Operator Manual Initial issue: 05/11 Page 9 - 86 Latest revision: 03/13