Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 100
Clean the PowerSquare, Operator Maintenance Plan, Introduction, CAUTION, Outside of the PowerSquare
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
6 - Maintenance - Clean the PowerSquare Operator Maintenance Plan Interval • Every week • When the message OPERATOR MAINTENANCE is displayed on the screen. Task Reference Clean the machine. See page 96. Lubricate the stitch head. See page 103. Clean the former roller. See page 97. Clean the polyurethane strips in See page 98. the form clamp. Clean the trimmings-removal fingers. See page 100. Clean excess grease from the See stitch head page 102. Clean the PowerSquare Introduction Clean the PowerSquare every week to remove surface dust. CAUTION: Only clean the machine with materials that are recommended in this manual. Do not use other chemicals or abrasive material. Outside of the PowerSquare Use a moist cloth to clean the outside of the PowerSquare. Touch screen Clean the touch screen with a clean, dry cloth. Never use an abrasive material or chemical to clean the touch screen. Light pressure with a clean, dry cloth is enough to remove fingerprints. Do not use too much force. 96 Watkiss PowerSquare™224 User Manual