Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 76
Jam At Side Trim, Jam Before Trim
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5 - Error Conditions, Problems and Solutions - Message List Message JAM AT SIDE TRIM INFEED JAM AT SIDE TRIM OUTFEED JAM AT STACKER INFEED Information Reference Open and then close the top cover of the side-trimmer. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. Open and then close the top cover of the side-trimmer. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. There is a jam in the stacker infeed. Remove the books from the stacker infeed. Press the reset button on the stacker. See "Jam at stacker infeed (Book Stacker)" on page 83. JAM AT STACKER OUTFEED JAM BEFORE TRIMMER There is a jam in the stacker outfeed or there are paper-trimmings in the stacker outfeed. Remove the books from the stacker outfeed. Check for paper-trimmings and remove them if present. Press the reset button on the stacker. See "Jam at stacker outfeed (Book Stacker)" on page 84. There is a book jammed before the See "Jam before trimmer. Open the main deck to the Trimmer" on remove the book. page 80. 72 Watkiss PowerSquare™224 User Manual