Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 79
See The Side, SIDE TRIM COVER
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference Side trim axis moving The side-trim axis is moving. This message clears when the adjustment is complete. If the message does not clear: Open and then close the top cover of the side-trimmer. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SIDE TRIM COVER OPEN The top cover of the side-trimmer is open. Close the top cover of the sidetrimmer. If the message does not clear, open and then close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SIDE TRIM - no comms Check that the mains power input cable and the communications cable are connected. See "The SideTrimmer" on page 7. Use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. STACKER FULL The stacker is full. Unload the books from the stacker. Watkiss PowerSquare™224 User Manual 75