Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 110
See Only apply the grease
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
6 - Maintenance - Lubricate the Stitch Head Step 1 2 Action Information Apply a thin line of grease from the See FIGURE 60. tube, 20mm long, to the visible surface of the driver bar. The line of grease must be a maximum of 0.5mm thick and as shown in FIGURE 60. Note: Apply the grease in an upward direction, from the bottom of the driver bar. 20mm long x 0.5mm thick Note: Only apply the grease as shown. If you apply additional grease, the paper gets marked. Fit the wire holder. 106 Watkiss PowerSquare™224 User Manual
6 - Maintenance - Lubricate the Stitch Head
106
Watkiss PowerSquareâ„¢224 User Manual
Step
Action
Information
1
Apply a thin line of grease from the
tube, 20mm long, to the visible
surface of the driver bar.
The line of grease must be a maxi-
mum of 0.5mm thick and as shown
in FIGURE 60.
Note:
Apply the grease in an
upward direction, from the bottom
of the driver bar.
Note:
Only apply the grease as
shown. If you apply additional
grease, the paper gets marked.
See FIGURE 60.
2
Fit the wire holder.
20mm long
x 0.5mm thick