Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 116

Clear paper from the trim stop

Page 116 highlights

6 - Maintenance - Clear paper from the trim stop Clear paper from the trim stop When to do • Clear paper from the trim stop if the books are not trimmed square. If paper trimmings collect on the trim stop, the books are not trimmed square. Orange Plastic Hand Screw Locking Plate Trim Stop Guard FIGURE 64. Trim Stop Guard Trim Stop FIGURE 65. Trim Stop Step 1 2 3 4 5 Action Information Remove the trim bin. Open the trim stop guard. See Figure 64. Loosen the 2 orange plastic hand screws to release the locking plates. The locking plates can rotate to release the trim stop guard. Pull the trim stop guard towards you. Check the trim stop and See Figure 65 remove any pieces of trimmed paper. Close the trim stop guard. Push the trim stop guard into position. Hold the locking plates in position and tighten the orange hand screws. Attach the trim bin. 112 Watkiss PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

6 - Maintenance - Clear paper from the trim stop
112
Watkiss PowerSquare™224 User Manual
Clear paper from the trim stop
When to do
Clear paper from the trim stop if the books are not trimmed square.
If paper trimmings collect on the trim stop, the books are not trimmed square.
FIGURE 64.
Trim Stop Guard
Locking Plate
Trim Stop Guard
Orange Plastic Hand Screw
FIGURE 65.
Trim Stop
Trim Stop
Step
Action
Information
1
Remove the trim bin.
2
Open the trim stop guard.
See Figure 64.
Loosen the 2 orange plastic hand
screws to release the locking plates.
The locking plates can rotate to release
the trim stop guard.
Pull the trim stop guard towards you.
3
Check the trim stop and
remove any pieces of trimmed
paper.
See Figure 65
4
Close the trim stop guard.
Push the trim stop guard into position.
Hold the locking plates in position and
tighten the orange hand screws.
5
Attach the trim bin.