Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 81
See Empty the, Trim Bin
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference SYSTEM ERROR 41.39 If the side-trimmer setting is 190mm or less, check that the book supports are removed. Otherwise, follow the instructions below for other 41.xx system errors. See "Remove and re-fit the SideTrimmer Book Supports" on page 47. SYSTEM ERROR 41.xx Open the top cover of the sidetrimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. TOUCH PAD ERROR There is a fault with the START and STOP touch pads. If the problem continues, then call your Watkiss service engineer. Touch START to clear machine There may be some paper in the machine. Touch START to clear the machine before you start a new job. Trim axis moving The trim axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. TRIM BIN OPEN The trim bin is not fitted or is not contacting the safety switch. Fit the trim bin. See "Empty the Trim Bin" on page 37. TRIM BLADE NOT PARKED The trim blade is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. Watkiss PowerSquare™224 User Manual 77