Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 75
position. Touch START, FORM CLAMP ERROR
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference FOLD BLADE NOT PARKED Open the folder cover, remove the paper, close the folder cover. Touch START , then follow the instructions on the screen. FOLD - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FORM CLAMP CLOSED The form clamp is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM ROLLER ERROR Open the folder cover, remove the See "Jam in the paper, close the folder cover. Folder or Former Area" on page 79. FORM ROLLER NOT PARKED The form roller is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM CLAMP ERROR There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 79. INVERTER ERROR Check for a paper jam and clear if See "Paper Jams" necessary. on page 79 Touch STOP to clear the message from the screen. If the problem continues, contact your Watkiss service engineer. JAM AT FORM ROLLER Open the folder cover, remove the See "Jam in the paper, close the folder cover. Folder or Former Area" on page 79. Watkiss PowerSquare™224 User Manual 71