Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline with side-tri - Page 88
Jam at stacker outfeed Book Stacker, JAM AT STACKER OUTFEED
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5 - Error Conditions, Problems and Solutions - Paper Jams Jam at stacker outfeed (Book Stacker) The error message JAM AT STACKER OUTFEED is displayed. This means a book or some paper-trimmings are covering the sensor at the Book Stacker outfeed. FIGURE 45. Book Stacker outfeed Stacker outfeed Stacker reset button Pusher Stacker outfeed is visible FIGURE 46. Stacker outfeed The pusher is in forward position. The stacker outfeed is not visible. If the stacker outfeed is visible: 1. Remove the book, if present. 2. Check for paper-trimmings and remove them, if present. 3. Press the reset button on the stacker. If the pusher is in the forward position so that the stacker outfeed is not visible: 1. Use your hand to move the pusher to the left, against the spring pressure. 2. Remove the book, if present. 3. Check for paper-trimmings and remove them, if present. 4. Press the reset button on the stacker. 84 Watkiss PowerSquare™224 User Manual