Konica Minolta magicolor 1600W Service Manual - Page 77
Retraction sequence, 2nd transfer roller cleaning, Operation timing
View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
magicolor 1600W magicolor 1650EN 13. 2ND TRANSFER SECTION/ MEDIA SEPARATION Theory of Operation Ver. 1.0 Nov. (1) Retraction sequence 1. When the 2nd image transfer pressure/retraction solenoid (SD4) is energized in the condition in which the 2nd transfer roller is pressed against the transfer belt, the Pressure/retraction clutch rotates a half turn. This moves the Pressure slider. 2. When the Pressure slider is moved, the 2nd transfer assy, which has been pushed up by the ribs on the Pressure slider, lowers. 3. When the 2nd transfer assy lowers, it allows the 2nd transfer roller to be retracted from the transfer belt. 2nd image transfer pressure/retraction solenoid (SD4) 2nd transfer assy Ribs COMPOSITION/ OPERATION Pressure slider Pressure/retraction clutch A034T2C536AA 13.3.2 2nd transfer roller cleaning • DC positive and negative transfer bias voltages are alternately applied to the 2nd transfer roller. This allows toner residue on the surface of the 2nd transfer roller to be transferred back to the transfer belt, thus cleaning the 2nd transfer roller. • The toner transferred back to the transfer belt is collected by the cleaning blade. 2nd transfer roller Transfer belt 4139to2082e1 A. Operation timing • The machine performs a cleaning sequence if it detects a sheet of paper having a length shorter than the length of the specified paper type. • The cleaning sequence is also carried out during a resetting sequence following a paper misfeed and the opening of the door during a print cycle. 50