Konica Minolta magicolor 1600W Service Manual - Page 94
Image stabilization control
View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
magicolor 1600W magicolor 1650EN COMPOSITION/ OPERATION Theory of Operation Ver. 1.0 Nov. 2008 18. Image stabilization control 18. Image stabilization control 18.1 Overview • To ensure that a stabilized output image is produced at all times, the following image stabilization controls are provided. Purpose To ensure stabilized transfer output To ensure stabilized image density; to ensure good tone reproduction Control ATVC * Described in the section dealing with the transfer Section IDC control • Leak detection control • IDC intensity control • Transfer belt surface cor- rection control • Control of the maximum amount of toner sticking • Laser intensity adjust- ment control • γ correction control Detection Temperature/ humidity sensor (TEM/ HUMS) IDC sensor (IDC) Temperature/ humidity sensor (TEM/ HUMS) * An explanation is given of the control for each section. IDC sensor 1st transfer roller Developing PC Charging 2nd transfer roller Developing bias Grid bias AIDC control Temperature/ humidity sensor IN OUT ATVC A034T2E583AA 67