Konica Minolta magicolor 4690MF magicolor 4690 Facsimile User Guide - Page 49
Using the Speed Dial Function, Using the List Function of the Phone Book, NOT FAX NO, REGISTERED
View all Konica Minolta magicolor 4690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using the Speed Dial Function If a recipient has been registered with a speed dial number, the recipient's fax number can be dialed simply by pressing a speed dial number key. " The recipient must have been registered with a speed dial in advance. For details, refer to "Registering a Speed Dial Destination" on page 74. 1 Press the Addressbook key twice. 2 Use the keypad to type in the speed dial number, and then press the Select key. " If a number was incorrectly entered, press the Back key, and then type in the correct number of the speed dial destination. 3 When EDIT=SELECT appears, press the Select key again. 4 Press the + or , key to select FINISH, and then press the Select key. The destination is specified. " To erase the selected destinations, press the Stop/Reset key. " If the entered speed dial number is not registered with a fax number, the message NOT FAX NO. appears. In addition, if the entered speed dial number is not registered with a recipient, the message NOT REGISTERED! appears. Enter a speed dial number registered with a fax number. Using the List Function of the Phone Book If a recipient is registered with a speed dial number or a group dial number, the recipient can be found by using the List or Search function of the phone book. Follow the procedure described below to search using the List function of the phone book. 1 Press the Addressbook key four times. 2 Check that LIST is selected, and then press the Select key. The list of programmed speed dial numbers and group dial numbers is displayed. 3 Press the + or , key to select the desired destination, and then press the Select key. 4 When EDIT=SELECT appears, press the Select key again. 5 Press the + or , key to select FINISH, and then press the Select key. " To erase the selected destinations, press the Stop/Reset key. Specifying a Recipient 43