Konica Minolta magicolor 4690MF magicolor 4690 Facsimile User Guide - Page 57
Sending a Fax Manually, Sending a Fax Manually After Using the Telephone
View all Konica Minolta magicolor 4690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6 Specify the fax number of the recipient. " Refer to "Specifying a Recipient" on page 41. " To send a broadcast transmission to multiple destinations, refer to "Sending a Fax to Multiple Recipients (Broadcast Transmission)" on page 45. 7 Press the Start key to begin scanning and sending the fax. " To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to cancel the setting. Select YES, and then press the Select key. Sending a Fax Manually Sending a Fax Manually After Using the Telephone If the machine is connected to a telephone and the same line is used for both phoning and faxing, the document can simply be sent after talking with the recipient over the phone. This is useful, for example, if you want to tell the recipient that you are sending a fax. " Manual transmission cannot be used together with duplex (dou- ble-sided) document transmission. 1 Load the document into the ADF. 2 If desired, adjust the image quality. " The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on page 40. 3 Pick up the handset and check that the dial tone can be heard. 4 Specify the fax number of the recipient by using the telephone to dial the fax number. " The fax number of the recipient can also specified using the keypad in the control panel of this machine. " If Pulse is selected as the telephone line type, press the key to tem- porarily change the line type to Tone. 5 After finishing talking on the phone, the recipient should press the neces- sary key to start receiving the fax. Once the recipient's fax machine is ready, a beep is sounded. Sending a Fax Manually 51