Konica Minolta magicolor 4690MF magicolor 4690 Facsimile User Guide - Page 55
Memory Transmission and Direct Transmission, Memory Transmission, Direct Transmission
View all Konica Minolta magicolor 4690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Memory Transmission and Direct Transmission There are two methods for sending documents with this machine: memory transmission and direct transmission. Memory Transmission With this method, the fax transmission starts after the entire document is scanned and stored in the memory. The total number of pages is automatically printed with the page number in the header. However, the memory may become full if there are many pages in the document or if the data is large due to the fine image quality (resolution). Direct Transmission With this method, the transmission is performed in real time in the transmission sequence of the destinations. If there are many pages in the document, the fax can be sent with this method without the memory becoming full. " As a default, MEMORY TX (memory transmission) is selected. The default setting can be changed from the UTILITY menu. For details, refer to "FAX TX OPERATION" on page 25. " Direct transmission cannot be used together with duplex (dou- ble-sided) document transmission. Changing the Transmission Method The transmission method can be temporarily changed from the default setting. 1 Position the document to be faxed. 2 If desired, adjust the image quality. " The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on page 40. 3 Press the + or , key to select MEMORY TX, and then press the Select key. The TX MODE screen appears. " If direct transmission has been specified as the default, DIRECT TX appears. 4 Press the + or , key to select the desired transmission method, and then press the Select key. Memory Transmission and Direct Transmission 49