Kyocera FS 920 FS-820/920 Operation Guide - Page 26

Connecting to USB Interface, Connecting to Power, Connections, OPERATION GUIDE, USB Interface

Get Kyocera FS 920 - B/W Laser Printer PDF manuals and user guides View all Kyocera FS 920 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Connections Connecting to USB Interface 1 Connect the USB cable (not included) to the USB Interface Connector. NOTE: Use a USB cable with a rectangular Type A plug and a square Type B plug. The USB cable should be shielded and no longer than 5 meters (16 feet) long. 2 Connect the other end of the USB cable to the computer's USB interface connector. Connecting to Power Install the printer close to an AC wall outlet. If an extension cord is used, the total length of the power cord plus extension should be 5 meters (16 feet) or less. NOTE: Ensure the printer's power switch is off. Only use the power cord supplied with the printer. 1 Connect the power cord to the Power Cord Connector at the rear of the printer. 2 Connect the other end of the power cord to a power outlet. 10 OPERATION GUIDE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Connections
10
OPERATION GUIDE
Connecting to USB Interface
1
Connect the USB cable (not
included) to the
USB Interface
Connector
.
NOTE:
Use a USB cable with a rectangular Type A plug and a square
Type B plug. The USB cable should be shielded and no longer than 5
meters (16 feet) long.
2
Connect the other end of the USB cable to the computer’s USB interface
connector.
Connecting to Power
Install the printer close to an AC wall outlet. If an extension cord is used,
the total length of the power cord plus extension should be 5 meters (16
feet) or less.
NOTE:
Ensure the printer’s power switch is off. Only use the power cord
supplied with the printer.
1
Connect the power cord to the
Power Cord Connector
at the rear
of the printer.
2
Connect the other end of the power cord to a power outlet.