LG 32LX4DC User Manual - Page 17

Installation Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). When connecting with an antenna TV Back DVI INPUT (PC/DTV INPUT) S-VIDEO R AUDIO L/MONO VIDEO VIDEO1 COMPONENT1 R L AUDIO INPUT VIDEO INPUT Antenna 1/2 Cable Box (R) AUDIO (L) VIDEO TV VCR OUTPUT SWITCH 34 RF Cable 1 Connect the RF antenna socket of the cable box to the Antenna socket on the set. 2 Connect the antenna cable to the RF antenna socket of the cable box. 3 Select 3 or 4 with channel switch on the cable box. 4 Tune the TV channel to the same selected output channel on the cable box. 5 Select channels at the cable box or with the cable box remote control. When connecting with a RCA cable TV Back DVI INPUT (PC/DTV INPUT) S-VIDEO R AUDIO L/MONO VIDEO VIDEO1 COMPONENT1 R L AUDIO INPUT VIDEO INPUT Antenna 1 Cable Box (R) AUDIO (L) VIDEO TV VCR OUTPUT SWITCH 34 RF Cable 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select Video1 input source with using the TV/VIDEO button on the remote control. - If connected to VIDEO 2 input (TV side), select Video2 input source. 3 Select your desired channel with the remote control for the cable box. 17