LG CR5765GD Owners Manual - Page 16
Overview
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
OVERVIEW Install the home station. (p17) 1 Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Robot Cleaner will not charge. 2 Turn on the power supply of the Robot Cleaner. (p18) Turn on the power switch located on the rearleft side of the Robot Cleaner. Press the Start/ Stop button on the Robot Cleaner or the Start button on the remote. 3 Check the dust bin. Empty the dust bin if necessary. 5 ft.(1.5 m) 5 ft.(1.5 m) 61/2 ft.(2 m) 4 Select the desired cleaning mode and options. (p24-29) Set the cleaning mode and options using the buttons on the Robot Cleaner or on the remote. 5 Start cleaning. (p19) Press the Start/Stop button on the Robot Cleaner or the Start button on the remote. Cleaning begins once the Robot Cleaner reverses and turns around. 6 Automatic charge. (p20-22) The Robot Cleaner automatically returns to the home station to charge. If the Robot Cleaner is in the middle of cleaning and runs out of battery charge, it returns to the home station to recharge and then continues cleaning where it left off once the battery is fully charged. It takes approximately three hours for the battery to fully charge. Warning If the Robot Cleaner is operated with the dust bin compartment lid left open, it can cause personal injury or serious damage to the product. 16