LG CR5765GD Owners Manual - Page 56

CLEANING THE DUST BIN If the dust bin is full, suction power may be reduced. Clean the dust bin before or after each cleaning session. Clean the dust bin using the following sequence: 1. O pen the dust bin compartment cover by pressing the PUSH button on the Robot Cleaner. 2. Grab the handle of the dust bin and pull it upward. 3. Pull the hook on the left of the filter cover on the rear of the dust bin to separate the filter and the sponge. ※ N ote that separating the filter may result in dust dropping. ※ R efer to p.57 when cleaning the dust bin filter. 4. Lift the dust bin lid upward while pressing the separation button on the dust bin. 5. E mpty the dust bin and clean it with a cleaning brush or under running water. 6. After cleaning with water, completely dry the dust bin in a well-ventilated area out of direct sunlight. 7. Reassemble the dust bin, putting the sponge and particulate filter back in and closing the lid. ※ R efer to p.57 for detailed assembly guides. 8. Put the dust bin into the Robot Cleaner and close the dust bin compartment cover. Tip • Operating the unit without filters fitted to the dust bin can cause a motor malfunction not covered by the warranty. • After cleaning the dust bin, make sure to assemble the filter and fit it to the dust bin. If the filters are not installed or the filter cover not assembled before cleaning is started, an error message will sound. • Always ensure that the dust bin lid is refitted correctly after cleaning the dust bin so that it closes easily and accurately. 56