LG CR5765GD Owners Manual - Page 20
Charging The Battery
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CHARGING THE BATTERY Automatic Charging The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the Robot Cleaner automatically goes into standby mode. ※ The power switch has to be in the ON position in order for the Robot Cleaner to charge at the home station. If the switch is OFF, an error message sounds. ※ After the battery is fully charged, the Robot Cleaner resumes cleaning, if interrupted, from the spot where it left off. (Page 21) ※ If the Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks successfully. ※ When the Robot Cleaner has completed cleaning the area, it will return to the home station even if the battery level is not low. Manual Charging Manually charge the Robot Cleaner before using it for the first time. Method 1. Attach the Robot Cleaner to the home station by aligning it to the front side of the home station. A melody sounds along with a message to start charging. ※ The main power switch must be in the ON position in order for the Robot Cleaner to charge. An error message is heard if the power switch is in the OFF position while mounted to the home station. Method 2. Press the HOME button on either the Robot Cleaner or the remote to return the Robot Cleaner to the home station to charge. ※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the Home button, it may take slightly longer to find the home station. ※ If the Robot Cleaner is within 4 in. (10 cm) of the front of the charging terminal while the power is turned on from Standby, it will automatically be returned to the home station and charging will begin. Tip Take the following precautions when using the home station: • If foreign material is caught on the charging terminal, charging may not be activated. Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.(p59) • To prevent electric shock or damage to the home station, do not touch the charging terminal with any metallic objects. • To avoid fire or electric shock, never disassemble or modify the home station. • Do not to place the Robot Cleaner, the home station or the power plug near a heat source. 20