LG CR5765GD Owners Manual - Page 57

CLEANING THE DUST BIN FILTER The Dust Bin Filter consists of a particulate filter and a sponge filter. Clean both the particulate filter and sponge filters using the following sequence. 1. P ull the hook on the left of the particulate filter module on the rear side of the dust bin to separate the particulate filter and the sponge filter. 2. Thoroughly clean out the fine dust particles on the particulate filter with a vacuum cleaner or cleaning brush. ※ D o NOT wash the particulate filter with water. Its suction power will be reduced. 3. Use a cleaning brush to clean the sponge filter. If using water to clean it, allow it to dry completely in the shade before refitting. 4. A ssemble the particulate filter and sponge filters back onto the filter housing using the following sequence. ※ Insert the hinge hooks in the slots on one end and snap the other end into the locking tab (shown). ※ Be careful not to incorrectly assemble the particulate filter and sponge filter onto the filter housing. Tip • To preserve the performance of the Robot Cleaner, clean the particulate filter at least once a week, with a brush or vacuum cleaner. • The particulate filter and sponge filters must be fitted to the filter housing before refitting the filter to the dust bin. Operating the Robot Cleaner without the particulate filter and sponge filters will cause the suction motor to malfunction. 57