LG CR5765GD Owners Manual - Page 19
How To Start And Stop Cleaning
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
HOW TO START AND STOP CLEANING Using the Robot Cleaner's Buttons Once the Robot Cleaner is turned on, press the START/STOP button on the top of the Robot Cleaner to begin cleaning. A melody sounds and cleaning begins. Press the START/STOP button any time during the cleaning cycle to stop cleaning. ※ To start cleaning when the Robot Cleaner is in standby mode, press START/STOP once to turn on the power, then press again to start cleaning. Using the Remote Press the Power button on the remote to turn on the Robot Cleaner. Once the Robot Cleaner is turned on, press the Start/Stop button on the remote to start cleaning. A melody sounds and cleaning begins. Press the Start/Stop button any time during the cleaning cycle to stop cleaning. ※ Collisions can occur during cleaning when the sensor cannot detect objects such as thin chair legs, table legs, or furniture corners. The internal impact detecting sensor reacts by moving the Robot Cleaner backwards. ※ If the Robot Cleaner is set to start cleaning at a location away from the home station, select a flat floor clear of obstacles for a starting location to prevent a malfunction of the obstacle detecting sensor. Curtains and walls must be 12 in. (30 cm) from the Robot Cleaner. Tip For best results: • Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the Robot Cleaner. • If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly be returned to the home station as the current home position has been accurately read. • When the mop plate is installed, the Robot Cleaner will not go over door sills or other obstructions higher than 3/16 in. (5 mm). 19