LG CR5765GD Owners Manual - Page 46
Setting a HomeGuard Location
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SMART APPLICATION FUNCTION Setting a HomeGuard Location To use HomeGuard, you must first set the monitoring location on the virtual map. 1. On the Location Setting screen, click a target location within the indicated area. You can also move the Robot Cleaner to the desired location manually. Use the camera view in the screen while adjusting the location. [Location setting] [Location setting1] [Location setting2] Tip • The Home Guard monitoring location can only be within 4.92 ft to the right and left side and within 9.84 ft from the front of the home station. If the Home station is relocated, the HomeGuard position will always use the Home station as the starting point, and so the HomeGuard position will need to be set again. 2. Use the arrows at the sides of the screen to turn the Robot Cleaner left or right. [Location Setting] Tip • If the HomeGuard mode has been terminated, or the mode is stopped due to low battery level, the Robot Cleaner exits HomeGuard mode and returns to the Home station where it will continue charging until it receives further instructions. 46