LG CR5765GD Owners Manual - Page 60
Cleaning The Side Brush
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is the risk of damage to the brushes. If the floor is rough or frequently cleaned, the side brushes may bend or become deformed. In this case, use the following method to straighten the side brush. 1. Turn the main power switch at the rear of the 1 unit to Off (O). 2. Place the Robot Cleaner at the end of a table to make cleaning the side brush easier. Make sure that the Robot Cleaner is not in danger of falling. 3. Soak the side brush in warm to hot water. 2 3 4. Press down on the side brush for about ten seconds so that it is completely submerged in the water. 5. Slowly wipe the side brush by sliding it through your hand. 4 5 6. Rotate the side brush and repeat steps 4-6 for each section of the brush. 7. Use the side brush only after it has completely dried. 6 7 Side Brush Maintenance 1. Use a screwdriver to remove the screws and separate the side brush from the main unit. 2. Clean the brush and remove any trapped hair. 3. Insert screws and assemble the side brush with the R and L markings on the brush and the main unit aligned. 60 1 2