LG HMC036KDT1 Service Manual - Page 46
Installation, Multi, Conditioner
View all LG HMC036KDT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Installation 6. Indoor unit installation. • Hook the indoor unit onto the upper position of the installation plate. (Engage the two hooks of the rear top of the indoor unit with the upper edge of the installation plate.) Ensure the hooks are properly seated on the installation plate by moving it in left and right. 7. Connecting the pipings to the indoor unit. • Align the center of the pipings and sufficiently tighten the flare nut with fingers. • Finally, tighten the flare nut with torque wrench until the wrench clicks. Wrench tightening the flare nut with torque wrench, ensure the direction for tightening follows the arrows on the wrench. Pipe Size Liquid Side (1/4") Gas Side (3/8") Gas Side (1/2") Torque 1.8kg . m 4.2kg .m 5.5kg .m 8. Wrap the insulation material around the connecting portion. CAUTION: Take care to arrange the pipings, drain hose and cables as the right upper picture for inserting it into the indoor unit and refixing the tubing holder easily. Connecting cable Drain hose Press the lower left and right side of the unit against the Installation Plate until the hooks engage with their slots (sound click). Indoor unit tubing Flare nut Pipings Spanner Torque wrench Plastic bands Insulation material Wrap the insulation material around the connecting portion. 46 MPS Multi Air Conditioner