LG LMCN185HV Installation Instructions - Page 14
Remove the spacer.
View all LG LMCN185HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation 9. Wrap the insulation material around the connecting portion. 1) Overlap the connection pipe insulation and the indoor unit pipe heat insulation material. Bind them together with vinyl tape so that there is no gap. 2) Wrap the area which accommodates the rear piping housing section with vinyl tape. 3) Bundle the piping and drain hose together by wrapping them with vinyl tape over the range within which they fit into the rear piping housing section. Plastic bands Insulation material Connection pipe Vinyl tape (wide) Connecting cable Wrap with vinyl tape Pipe Indoor unit piping Vinyl tape(narrow) Drain hose Pipe Vinyl tape(narrow) Wrap with vinyl tape(wide) 10. Reroute the pipings and the drain hose across the back of the chassis. 11. Indoor unit installation 1) Remove the spacer. 2) Ensure that the hooks are properly seated on the installation plate by moving it left and right. 3) Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound). Piping for passage through piping hole Connecting cable Drain hose 14 Multi Air Conditioner