Lacie LaCinema Classic HD User Manual - Page 38
STEP 1: Connect the Power Supply
View all Lacie LaCinema Classic HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
LaCinema Classic HD User Manual Sharing Files Throughout Your Home Network page 38 6.1.1. STEP 1: Connect the Power Supply 1. Plug one end of the power adapter cord into the back of LaCinema Classic HD and the other end into a power outlet (Fig. 62). The LaCinema Classic HD may take a few seconds to boot. Move on to the next step, 6.1.2. STEP 2: Connect the Ethernet Cable. CAUTION: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from another LaCie device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty. TECHNICAL NOTE: You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. Fig. 62