Lenovo ThinkCentre M55e Hardware Maintenance Manual - Page 102
Align the drive bay assembly with the two slots and rails on the sides of
View all Lenovo ThinkCentre M55e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
9. Lift the power supply out of the chassis. 10. Install the new power supply and install the three screws that secure the power supply at the rear of the chassis and install the screw that secures the power supply at the front. 11. Position the system board so that the screws holes are aligned and install the system board screws. 12. Install the hard disk drive. Make sure to route the power supply cable for the system board underneath the hard disk drive. See "Replacing the hard disk drive" on page 112. 13. Reconnect all other power supply cables to the system board and the drives. Make sure the cables are correctly routed. See the system board illustration for your machine type at "Identifying parts on the system board" on page 89. 14. Align the drive bay assembly with the two slots and rails on the sides of the chassis, reconnect the drive cables on the system board, and then slide the drive bay assembly towards the rear of the chassis until it snaps into position. 15. Reinstall the front bezel. 16. Go to "Completing the FRU replacement" on page 124. 96 Hardware Maintenance Manual