Lenovo ThinkCentre M55e Hardware Maintenance Manual - Page 125
Replacing the power switch/LED assembly
View all Lenovo ThinkCentre M55e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Replacing the power switch/LED assembly 1. Remove cover. See "Removing the cover" on page 87. 2. Remove the front bezel by releasing the three tabs and pivoting the bezel forward to remove completely. 3. Slide the drive bay assembly forward until the drive bay assembly is aligned with the two slots on the sides of the chassis.Pull upward on the handle 1 on the drive bay assembly to remove it completely from the computer. 4. Remove the hard disk drive. See "Replacing the hard disk drive" on page 112. 5. Disconnect the power switch/LED assembly cable from the system board. See the system board illustration for your machine type at "Identifying parts on the system board" on page 89. 6. Remove the screw that secures the power switch/LED assembly to the chassis. Chapter 8. Replacing FRUs (desktop computers) 119