Lenovo ThinkCentre M55e Hardware Maintenance Manual - Page 117
Connect the heat sink and fan assembly cable to the system board. See
View all Lenovo ThinkCentre M55e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
11. Lower the microprocessor straight down into the socket. Note: Install the black protective cover that was removed from the new microprocessor onto the defective microprocessor after the installation is complete. 12. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 13. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Identifying parts on the system board" on page 89. 16. Position the fan duct on the heat sink fan. 17. Go to "Completing the FRU replacement" on page 124. Chapter 8. Replacing FRUs (desktop computers) 111