Lenovo ThinkCentre M55e Hardware Maintenance Manual - Page 131
connectors on Reconnect the external cables and power cords to the computer. See Rear
View all Lenovo ThinkCentre M55e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Important Correctly route all power supply cables to avoid interference with the drive bay assembly. Keep cables clear of the hinges and sides of the computer chassis. 3. Position the computer cover on the chassis so that the rail guides on the sides of the cover engage the rails and push the cover to the closed position until it snaps into position. 4. If the cover is secured with thumbscrews, install them. 5. Reconnect the external cables and power cords to the computer. See "Rear connectors" on page 86. 6. If you have replaced the system board, you must update (flash) the BIOS. See "Flash update procedures" on page 606. 7. Some FRU replacements require the configuration to be updated. See Chapter 6, "Using the Setup Utility," on page 51. Chapter 8. Replacing FRUs (desktop computers) 125