Lenovo ThinkPad 600E User's Reference Guide for TP 600 - Page 131

Title: C79EGMST CreationDate: 02/10/98 09:24:42 Hints, Tips, and Limitations Using the Power Management Modes You can select either the Resume on incoming call option or the Hibernate X minutes after suspend option but not both. If you select one option, the other option becomes gray and cannot be selected. To enable Resume on incoming call, do as follows: 1. Start the ThinkPad Configuration program. 2. Click on the Resume/Suspend options tab. 3. Click on Resume on incoming call. To enable Hibernate X minutes after suspend, do as follows: 1. Start the ThinkPad Configuration program. 2. Click on the Hibernation tab. 3. Click on Hibernate X minutes after suspend. Using a PC Card with the Docking Station In the Windows 95, Windows NT, Windows 3.1, or DOS environment, you need to install the PC Card support software after docking your computer to the docking station. If you have already installed the PC Card support software, uninstall it and then reinstall it after you dock your computer to the docking station. USB Connector Considerations For PCI Cards in the SelectaDock III Docking Station When the setting of the USB connector on your computer is enabled (the default setting), do not use a PCI Video Card and a PCI Network Card at the same time in the SelectaDock III docking station. Your system cannot start if both cards are inserted. For the USB Connector Setting on the SelectaDock III Docking Station Do not disable the USB connector on the SelectaDock III. If you disable it, the system might hang during a hot- or warm-dock or undock operation. If this occurs, cold-boot the system for recovery. Chapter 4. Solving Computer Problems 113