Lenovo ThinkPad 600E User's Reference Guide for TP 600 - Page 99
Enabling the IDE Drive on the Docking Station, Docking Station, Enable IDE device in the Docking
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Title: C79EGMST CreationDate: 02/10/98 09:24:42 Using a Docking Station For an IDE device such as a hard disk drive or a CD-ROM drive: 1 Start the ThinkPad Configuration program and click on the Docking Station ( ) button. 2 Add a checkmark on Enable IDE device in the Docking Station, if there is none, and restart the computer. 3 Click on Device Manager and check whether there is a resource conflict between the new IDE device and the other devices in the computer. If there is a resource conflict, see the the online book. Enabling the IDE Drive on the Docking Station If you have installed an IDE device (such as a hard disk drive or a CD-ROM drive) in the docking station, you must change the setting on your computer to enable the device. By default, your computer uses the primary IDE channel for the primary hard disk drive (Primary-Master) and the secondary IDE channel for a device in the UltraBay II (Secondary-Master). You cannot use the IDE device in the docking station in this default 2-channel default IDE mode. To enable an IDE device in the docking station, you must change the default setting to either of the following: 3-channel IDE mode 2-channel IDE mode In 3-channel IDE mode, you can still use the hot and warm plug or unplug functions. An additional IRQ for the third IDE channel is required. In 2-channel IDE mode, you do not have to assign an extra IRQ. However, you cannot use warm plug or unplug functions. Note: If you change the IDE channel configuration, the drive letter assignment might be changed. Chapter 2. Extending the Features of Your Computer 81