Lenovo ThinkServer RD340 (English) User Guide - Page 108

Removing the TR 500 Key, Key on the ThinkServer RAID 500 Adapter

Page 108 highlights

Note: Carefully handle the TR 500 Key by its edges. 8. Locate the TR 500 Key connector on the ThinkServer RAID 500 Adapter and then insert the TR 500 Key into the connector. You might need to remove the ThinkServer RAID 500 Adapter first, install the TR 500 Key on the ThinkServer RAID 500 Adapter, and then reinstall the ThinkServer RAID 500 Adapter. See "Installing or removing the RAID card" on page 90. Note: Ensure that the TR 500 Key is securely seated on the ThinkServer RAID 500 Adapter. Figure 54. Installing the TR 500 Key 9. Reconnect cables to the ThinkServer RAID 500 Adapter. See "Connecting the cables" on page 36. 10. Reinstall the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See "Replacing the riser card assembly 1" on page 160. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation, go to "Completing the parts replacement" on page 170. Then, the hardware RAID 5 and RAID 50 levels are available for your server if your server has the required number of hard disk drives installed. Refer to the MegaRAID SAS Software User Guide on the documentation DVD that comes with your server for information about how to configure the hardware RAID. Removing the TR 500 Key Attention: Do not open your server or attempt any repair before reading and understanding "Safety information" on page iii and "Guidelines" on page 73. This topic provides instructions on how to remove the TR 500 Key from a ThinkServer RAID 500 Adapter if your server has a ThinkServer RAID 500 Adapter with a TR 500 Key option installed. Attention: Back up your data before you begin if you need to reconfigure RAID and reinstall the operating system after removing the TR 500 Key. Before you begin, print all the related instructions or ensure that you can view the PDF version on another computer for reference. Notes: 96 ThinkServer RD340 User Guide and Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214

Note:
Carefully handle the TR 500 Key by its edges.
8.LocatetheTR500KeyconnectorontheThinkServerRAID500AdapterandtheninserttheTR500Key
intotheconnector.YoumightneedtoremovetheThinkServerRAID500Adapterfirst,installtheTR500
Key on the ThinkServer RAID 500 Adapter, and then reinstall the ThinkServer RAID 500 Adapter. See
“Installing or removing the RAID card” on page 90.
Note:
EnsurethattheTR500KeyissecurelyseatedontheThinkServerRAID500Adapter.
Figure54.InstallingtheTR500Key
9. Reconnect cables to the ThinkServer RAID 500 Adapter. See “Connecting the cables” on page 36.
10. Reinstall the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See
“Replacing the riser card assembly 1” on page 160.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 170. Then, the hardware
RAID5andRAID50levelsareavailableforyourserverifyourserverhastherequirednumberofharddisk
drives installed. Refer to the
MegaRAIDSASSoftwareUserGuide
onthedocumentationDVDthatcomes
withyourserverforinformationabouthowtoconfigurethehardwareRAID.
Removing the TR 500 Key
Attention:
Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 73.
ThistopicprovidesinstructionsonhowtoremovetheTR500KeyfromaThinkServerRAID500Adapterif
yourserverhasaThinkServerRAID500AdapterwithaTR500Keyoptioninstalled.
Attention:
BackupyourdatabeforeyoubeginifyouneedtoreconfigureRAIDandreinstalltheoperating
system after removing the TR 500 Key.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computer for reference.
Notes:
96
ThinkServer RD340 User Guide and Hardware Maintenance Manual