Lenovo ThinkServer RD340 (English) User Guide - Page 55
Attention, Clear CMOS jumper, You can configure, recover, enable
View all Lenovo ThinkServer RD340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
The following illustration shows the status of the jumpers and switches on the system board of your server. You can configure, recover, enable, or disable some specific features of the system board by setting the jumpers or moving the switches. Figure 31. System board jumpers and switches Table 1. System jumpers 1 Clear CMOS (Complementary Metal Oxide Semiconductor) jumper 2 ThinkServer Management Module Enable/Disable jumper 3 Switches Attention: To set the jumpers or move switches, you need to remove the server cover to access the system board. Do not open your server or attempt any repair before reading and understanding "Safety information" on page iii and "Guidelines" on page 73. 1 Clear CMOS jumper Used to clear CMOS and recover your server to the factory default settings. Note: After clearing CMOS, your BIOS recovers to the factory default settings. Chapter 3. Product overview 43