Lenovo ThinkServer RD340 (English) User Guide - Page 48
Connecting the cables
View all Lenovo ThinkServer RD340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
The following illustrations show the connectors on the backplane for server models with eight 2.5-inch hard-disk-drive bays. Figure 26. Front view of the backplane for server models with eight 2.5-inch hard-disk-drive bays 1 Slot 2 for a 2.5-inch hard disk drive 2 Slot 4 for a 2.5-inch hard disk drive 3 Slot 6 for a 2.5-inch hard disk drive 4 Slot 7 for a 2.5-inch hard disk drive 5 Slot 5 for a 2.5-inch hard disk drive 6 Slot 3 for a 2.5-inch hard disk drive 7 Slot 1 for a 2.5-inch hard disk drive 8 Slot 0 for a 2.5-inch hard disk drive Figure 27. Rear view of the backplane for server models with eight 2.5-inch hard-disk-drive bays 1 8-pin power connector 2 Mini-SAS ports 4-7 3 Mini-SAS ports 0-3 1 8-pin power connector Used to connect a power cable to provide power to the backplane. 2 Mini-SAS ports 4-7 Used to connect the mini-SAS connector on one end of the mini-SAS signal cable to support the hard disk drive 4 to hard disk drive 7. 3 Mini-SAS ports 0-3 Used to connect the mini-SAS connector on one end of the mini-SAS signal cable to support the hard disk drive 0 to hard disk drive 3. Connecting the cables This topic provides instructions on the following mini-SAS to mini-SAS signal cable connections: • Connecting cables from the system board to the backplane • Connecting cables from the RAID card to the backplane 36 ThinkServer RD340 User Guide and Hardware Maintenance Manual