Lenovo ThinkServer RD340 (English) User Guide - Page 46
Backplane for server models with six 2.5-inch hard-disk-drive bays
View all Lenovo ThinkServer RD340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
The following illustrations show the connectors on the backplane for server models with four 3.5-inch hard-disk-drive bays. Figure 22. Front view of the backplane for server models with four 3.5-inch hard-disk-drive bays 1 Slot 0 for a 3.5-inch hard disk drive 2 Slot 1 for a 3.5-inch hard disk drive 3 Slot 2 for a 3.5-inch hard disk drive 4 Slot 3 for a 3.5-inch hard disk drive Figure 23. Rear view of the backplane for server models with four 3.5-inch hard-disk-drive bays 1 8-pin power connector 2 Optical drive power connector 3 Mini-SAS ports 0-3 1 8-pin power connector Used to connect a power cable to provide power to the backplane. 2 Optical drive power connector Used to connect the power cable for the slim optical drive if the server has one installed. 3 Mini-SAS ports 0-3 Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the hard disk drive 0 to hard disk drive 3. Backplane for server models with six 2.5-inch hard-disk-drive bays This topic provides information to help you locate the connectors on the backplane for server models with six 2.5-inch hard-disk-drive bays. 34 ThinkServer RD340 User Guide and Hardware Maintenance Manual