Lenovo ThinkServer RD340 (English) User Guide - Page 184
backplane and properly route the cable in the chassis.
View all Lenovo ThinkServer RD340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
• Route the signal cables 1 through the left inner side of the chassis. The signal cables include the mini-SAS to mini-SAS signal cable, the front panel cable, the front panel USB cable, the diagnostic module cable, and the SATA signal cable for the optical drive. • Connect the power cable 2 for the optical drive to the optical drive power connector on the backplane and properly route the cable in the chassis. • Route the backplane power cable 3 through the right inner side of the chassis. Figure 132. Cable routing for server models with 3.5-inch hard disk drives 172 ThinkServer RD340 User Guide and Hardware Maintenance Manual
• Route the signal cables
1
through the left inner side of the chassis. The signal cables include the
mini-SAStomini-SASsignalcable,thefrontpanelcable,thefrontpanelUSBcable,thediagnostic
module cable, and the SATA signal cable for the optical drive.
• Connect the power cable
2
for the optical drive to the optical drive power connector on the
backplane and properly route the cable in the chassis.
• Route the backplane power cable
3
throughtherightinnersideofthechassis.
Figure132.Cableroutingforservermodelswith3.5-inchharddiskdrives
172
ThinkServer RD340 User Guide and Hardware Maintenance Manual