Lexmark 12N0009 Setup Guide - Page 28
top of the caster., Remove the spacer from
UPC - 734646560092
View all Lexmark 12N0009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2 Place the high-capacity feeder on the floor or adequate work surface. 3 Remove the four screws securing one of the casters to the highcapacity feeder. 4 Add or remove spacers. To add spacers: a Insert the four screws through the caster. b Place the spacers on the screws. c Align and insert the screws into the screw holes on the high-capacity feeder. To remove the factory installed spacer: a Remove the spacer from the top of the caster. b Insert the four screws through the caster. c Align and insert the screws into the screw holes on the high-capacity feeder. 5 Tighten the four screws to secure the caster to the high-capacity feeder. 6 Repeat steps 3 through 5 to add or remove spacers on the remaining three casters. 7 Return to step 5 on page 19. 22 Set up the printer and paper handling options