Lexmark 12N0009 Setup Guide - Page 74

2 Plug one end of the high-capacity feeder power cord into the socket on the side of the high-capacity feeder and the other end into a properly grounded outlet. 3 Turn on the printer. If the printer is attached locally (directly to a computer), leave the computer and any other attached devices turned off. You will turn these on in a later step. The message Performing Self Test appears on the display while the printer warms up. After the internal tests complete, the Ready message indicates the printer is ready to receive jobs. If you see a message other than Ready , refer to your quick reference booklet or the publications CD for instructions on clearing the message. Click Printing, and then Understanding printer messages. 4 If you attached your printer to a network, continue with "Printing a network setup page" on page 69. Otherwise, go on to "Printing a menu settings page" on page 68. Printing a menu Print the menu settings page to review the default printer settings and settings page to verify that printer options are installed correctly. Note: For more information about using the operator panel and changing menu settings, refer to the publications CD. UTILITIES MENU 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 1 Press Menu until you see Utilities Menu, and then press Select. 2 Press Menu until you see Print Menus, and then press Select to print the page. The message Printing Menus is displayed. 3 Verify the options you installed are correctly listed under "Installed Features." If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option. 4 Verify the amount of memory installed is correctly listed under "Printer Information." 5 Verify the paper trays are configured for the sizes and types of paper you loaded. 68 Verify printer setup